Features for YSM 16SS
- Square bed ways on Y-axe
- 10″x50″ Table (54″ – Opt.)
- R-8 or ISO#30 Spindle
(ISO#40 Spindle Opt.) - “Direct Shift” Hi-Low switch (Patent)
- Longer travel on Z-axe
- SCM4 Steel alloy spindle shaft
- PCB phosphor bronze leadscrew nut
- Hardened & ground on X.Y. slideways and top of table
- Turcite-B coated on X.Y. slideways
- Head inward & outward swivel is standard if no need this please specially specify.
Optional Accessories:
- Coolant System
- Power Feed (X.Y.Z. axes)
- Simple type electric box
- Deluxe type electric box
- Chip Tray
- Auto lubrication system
- Halogen Work Lamp
- Two speed motor for step head
- 54″ table for 16SS
- Gear type elevating reducer motor for knee up/down for 16SS
Standard Accessories:
- Draw Bar
- Splash Shield
- Tool Box
Specifications
| Workding surface | 1270×254 (10″x50″) |
| Longitudinal travel manual | 900 |
| Longitudinal travel-with | 860 |
| Cross Travel | 426 |
| Vertical Travel Of Knee | 446 |
| Overall Height-A | 2256 |
| Overall Depth-B | 2000 |
| Overall Width-C | 1680 |
| Table to Spindle Nose-D | 0~520 |
| Head 45 Inward-E | 0~484 |
| Head 90 – F | 255~726 |
| Head 45 Outward – G | 226~838 |
| Overarm Travel | 560 |
| Overarm Swivel | 360 |
| Vertical Feed (Per revolution of spindle) | 0.04 / 0.08 / 0.14 |
| Quill Travel | 127 |
| Spindle Taper | ISO#30 or R8 (#40 optional) |
| Motor | 3HP |
| Spindle Speeds (Step Head) | 60Hz: 66-120-195-320-570-1040-1680-2700 r.p.m. |
| Net weight | 1,260 kgs |